What Is The Best Way To Grow A Snake Plant? or way to grow a snake plant? The best method to grow a snake plant is by dividing, rhizome method and cultivating snake leaves in the soil.
There are several incorrect and correct methods for growing a snake plant.
What Is The Best Way To Grow A Snake Plant? This blog post demonstrates how I propagated my Sansevieria plant.
Understanding that Sansevieria implies snake plant is critical since I will combine terms in this post.
Propagating a snake plant is comparable to propagating other home plants, such as a spider plant. [Link]
You may learn how to cultivate a snake plant from seed by clicking here.
What Is The Best Way To Grow A Snake Plant: The 4 Ways To Propagate Snake Plant
There are five ways of propagating a snake plant, including seed propagation.
You can grow snake plants from seed, but I will not discuss that thoroughly.
What Is The Best Way To Grow A Snake Plant? The four best methods for propagating snake plants are as follows:
1. Snake plant Propagation in water.
2. Snake plant Propagation in soil.
3. Snake plant Propagation by division method.
4. Snake plant Propagation by rhizome method
How to Propagate Snake Plants in Water
Propagation of a snake plant by water is when you cut the leaf and emerge it in a glass jar containing water.
What Do I Need To Propagate Snake Plants In Water?
Starting to cultivate a Sansevieria or snake plant in water The following is a list of the materials required to propagate snake plants in water.
• A healthy snake plant that is free of paste and root rot.
• Clean pruning shears or scissors.
• a tiny transparent glass jar or vase and • clean water
• potting soil that drains nicely
Step-By-Step Instructions For Propagating Snake Plants [Sansevieria] In Water
Step 1: Using sterilized scissors, clip off snake plant leaves near the earth from the mother plant. Make sure to give the leaves a little longer.
Step 2: Use your scissors to Cut the leaf horizontally into long sizes, ensuring the bottom of each leaf is cut in a V-shaped notch, and let the pointed edge of the leaf stay.
Note: for me cutting the bottom leaf into a v-shape tends to grow faster.
Step 3: Place the chopped leaf in a jar of water. Ensure the V cut is on the inside of the water and the pointy edge is up.
Ensure the water in the glass jar is slightly higher than the V cut. Because the root begins to develop from the v cut, it might be 2-3 inches above the V-shape.
Step 4: Move the container toward a sunny location and indirect sunlight.
Note: root will start shooting out after a couple of weeks.
If the water reduces After a couple of weeks or days, you must add water to maintain the water level.
Step 5: When the water becomes cloudy after two weeks, you should change the water from the jar to ensure proper oxygen passage and nutrients.
Note: this is very important because it helps to prevent bacteria and infections.
Step 6: Once the snake plant root fully springs about 1 inch, prepare a well-draining potting mix soil in a container.
Transfer your cutting from the jar to the planting pot filled with potting mix soil and ensure the pot has drainage holes to remove excess water.
Step 7: Water the soil so it will be moist. Do this constantly for the first 1-2 weeks
Note: I advise avoiding over-watering the snake plant in this early stage. But make sure the top soil is moist. Always do a finger test to know.
Step 8: Now, it is time to move your plant vessel to a sunny location with indirect sunlight for proper photosynthesis. And keep watering if the top soil is dry.
Pros
It is an easy method and requires a lot of funds.
The newly-developed route Root growth is visible to the eyes.
Cons
It is slow and takes months to grow and develop when planted in soil.
It involves various procedures.
How to Propagate Snake Plant in Soil Method
How to propagate snake plants in soil This method can be achieved by cutting the snake plant leaves into a V shape.
After achieving this shape, plant it into a well-draining soil mix in a pot or container.
What Do I Need To Propagate Snake Plants In Water?
Getting started to propagate a Sansevieria or snake plants in the soil below is the list of items needed to start propagating snake plants in soil.
- A healthy snake plant without pastes or root rot.
- Clean pruning shears or scissors.
- Well-draining potting mix.
Step-By-Step On Propagating Snake Plants [Sansevieria] In Soil.
Snake plants can be grown by planting a cut leaf in the soil. You can do this by following the simple procedures below.
Have you heard that snake plant is poisonous to human being and pet? Check this out so you will be careful.
Step 1: use scissors to cut off the snake plant leaf from the established mother plant. Make sure that you cut it near the soil.
Step 2: cut the leaves into 4 to 5 inches long. You must cut the bottom part of the leaf to be a V-shaped notch.
The v-cut of the bottom helps you to differentiate the top and the bottom.
Note: new root only grows from the bottom part of the snake plant leaf.
It means that the original arrangement (nature) of the tree leaf is from the part attached to the mother plant to the mouth of the leaf.
Step 3: allow the surface of the cut leaves to dry out and heal for a couple of days.
Note: The healing of the wounds is due to the cutting the plants get from you.
Please don’t skip this process because it is essential for the growth of your snake plant.
Step 4; prepare a well-draining soil mix in a pot or container that has a draining hole to remove excess water.
Step 5: plant your cutting in your prepared soil mix. Keep the notch part of the leaf in the soil, not too deep but let the v-cut ensure to covered with soil.
Step 6: Water the soil properly to ensure that the soil is moist. But do not over-water the plant because the watering can cause damage.
Avoid over-watering deep your finger 1 inch deep into the soil to feel if the soil is wet.
Step 7: move the container towards bright or indirect sunlight and moderate temperature for photosynthesis.
Step 8: monitor and take care of your snake plant growth. Be patient because a snake plant takes up to 3 months or more to grow for your cotton to shoot up.
Note after three months and a few weeks; I recommend you check for root development
Check for root development by gently tugging your baby plant to check if roots have developed. Please be careful in this process.
If you notice any roots, it is time to start watering your baby plant every week or two weeks if needed.
Pros
Keeping root cuttings in water is not needed.
It allows you to plant different snake plants in one pot, like Sansevieria cylindrica and Sansevieria moonshine.
Cons
Sometimes the new development plants may not have variegations.
You can only see the root while growing in the soil if you dig up the plant.
How To Propagate Snake Plants By Division Method
How to grow a snake plant by division method is by dividing your parent snake plants into different numbers and ensuring each division has a root clump.
After that, you can plant it in a starting mix of soil.
Growing a snake plant by division method is one of the most accessible and enjoyable ways of planting snake plants.
The division method is effortless and is one of the easiest and most natural ways of growing snake plants.
What Do I Need for Propagating Snake Plants by Division Method
Getting started to propagate a Sansevieria or snake plants by division method below is the list of items needed to start propagating snake plants in soil.
- An existing parent snake plant
- well-draining potting mix
- sharp knife, pruners, or scissors and
- Pot or container.
Step-By-Process To Propagate A Snake Plant By Division.
Step 1: remove the parent’s plan from its pot by laying the pot by the side and gently separating the plan from the pot.
If the plant Refuses to separate from the pot because the root is bonded, gently squeeze the soil to lose the root.
Step 2: Use a sharp knife or anything you feel comfortable with to divide the root clump from the parent plant into any number you want to propagate.
Note: This may only be possible if your plant is rootbound in extremely dense soil.
If the root is rootbound, In such a scenario, remove the roots from the central root clump using sharp, clean pruning shears or a knife.
Use as little as possible, eliminating as much as possible with your hands before making any cuts.
Ensure its section divided has at least three leaves and at least three rhizomes and accompanying roots.
Note: that rhizomes are the underground mother stem that shoots out the root.
Step 3: fill a pot with potting mix soil in a well-draining pot with holes. And make a hole with a stick so you can plant the newly divided snake plant.
Step 4: plants you achieve snake plant in the pot and ensure to gap them or plant them separately in different pots.
Step 5: water the plants, ensure the soil is properly wet, and place the pot in a sunny location in indirect sunlight.
Remember to not overwater in this early stage, but water frequently when needed.
Pros
The process is Faster than leaf propagation and seed planting.
The new shoot retains the variegation of the main plant.
Cons
Requires a mature snake plant that has multiple growths.
It requires you to uproot the existing mother snake plant.
How To Propagate Snake Plants By Rhizome
Propagating a snake plant by the rhizome method is similar to propagating a snake plant by division, requiring similar steps and procedures.
Before jumping into the propagation method, let us know what a rhizome is and what it looks like.
Now the question is, what is a rhizome? A rhizome is a horizontal underground stem of a plant.
The rhizomes produce the shoot and root of a newly developed plant.
What does a rhizome look like? A rhizome looks like fresh ginger. It is located right after the main stem of a plant, and it is usually underground.
Material Needed To Propagate A Snake Plant By Rhizome Method
- Existing snake plants
- Sterilize scissors or knife or pruners
- Planting pot or container
- Potting mix soil
- How to propagate a snake plant rhizome step by step.
Step 1: remove your mother’s Sansevieria plant from the pot and remove the soil from the plant.
Step 2: Look for the rhizomes near the root system and use your hand or knife to cut off the rhizome from the base of the plant.
Step 3: After cutting, keep the rhizome to the callus for 1-2 days to prevent root rot.
Step 4: fill a well-draining pot with a potting mix soil and plant the rhizome.
Step 5: Water the soil properly and position the pot in indirect sunlight for photosynthesis.
Pros
It is a fast way to propagate.
There is no need to divide the mother plant.
Suitable for variegated snake plants.
Cons
Uprooting the parent plant is necessary. It can cause damage if you do not take proper care.
Which method makes snake plants strong the most?
The propagation method that strengthens snake plants depends on how you care for them during the early stage.
But from my experience, I found that propagating by division, rhizome, or seed planting is always the best method to make your snake plant more robust and natural.
If you need to know how to grow a snake plant from seed, I have an existing article that will teach you a step-by-step process on how to grow a snake plant from seed.
What Is The Best Method Of Propagating Snake Plants?
The best method of propagating a snake plant is by division and rhizome method.
This method of propagation is the best because they are;
- stressless
- grow faster
- It is easy to control and
- can survive easily.
Another suitable method of growing a snake plant is by propagating the snake plant from seed.
Propagating a snake plant from seed is slower than the division method and rhizome.
If you’re interested in how to grow snake plants from seed, check out my article on how to grow snake plants from leaf-cutting.
Propagating a snake plant from seed is easy and has low maintenance.
Temperature Requirements For Snake Plant Propagation
You should keep the temperature required for snake plant propagation above 45°F. Still, the ideal temperature is between the Average room temperatures of 65°F and 90°F.
If your room temperature is fluctuating, there is no big trouble because snake plants can survive in such fluctuating temperatures
Also, avoid keeping your snake plant in a freezing room.
Is It Better To Propagate A Snake Plant In Water Or Soil?
What Is The Best Way To Grow A Snake Plant? Propagating in water tends to grow roots faster than leaf cutting in soil.
Propagating in water is not usually strong at the first stage of growth, and there is a possible chance of you getting root rot and transplanting shock.
Propagating Sansevieria leaf in soil takes a long time and patience and reduces risks of root rot and transplanting issues.
Propagating snake plants’ leaves in the soil make your plants strong even from the first growth stage, then leaf cutting in water.
What IS THE FASTEST WAY TO PROPAGATE SNAKE PLANTS?
What Is The Best Way To Grow A Snake Plant? The fastest way to propagate a snake plant is by division method and rhizome.
This method of propagating is by spreading out the existing grown snake plants, and this method is the fastest than leaf cutting or seed planting.
If you already have an existing snake plant that is not growing fast, learn how to make your snake plant grow faster .
How Do You Encourage Root Growth In Snake Plants?
The ideal method for caring for your snake plant root is by giving it appropriate water, not over-watering.
Over-watering can lead to root rot and cause infections.
The second option is to use a well-draining pot to remove excess water.
Ensure the use of potting mix soil and keep the pot in a sunny location for the roots to grow faster.
When Is The Best Time For Me To Propagate A Snake Plant?
The best season for growing a snake plant is spring or summer, usually the time for growing a plant. Because during this season, the plant tends to grow faster and do well.
In the spring and summer, the snake plant usually flourishes, which is when you can get a fresh parent, Sansevieria, to plant.
You can propagate Snake plants in any season if you set requirements such as temperature between 65°F and 80°F or above 45°F.
Another requirement of propagating a snake plant is to keep your snake plant out of direct sunlight.
And make sure to give them in sunny locations with indirect sunlight.
How Long Does a Snake Plant Take to Propagate?
Snake plants can take up to 9 weeks to three months to take root and even longer to produce new pups.
What Is The Best Way To Grow A Snake Plant? Propagating snake plants by division and rhizome method is a quick option for you to try because it tends to grow faster than propagating by leaf cutting.
In general, snake plants are very slow in propagating. But some factors can affect how long a
snake plant takes to grow.
Climate conditions, temperature, and propagation methods affect how long a snake plant takes to grow.
Regarding climate, snakes and other house plants take longer to propagate in winter. While in spring and summer, some plants usually grow faster.
Regarding temperature, growing a snake plant indoors with poor light takes a bit longer.
Other snake plants growing in proper indirect sunlight grow faster than those growing indoors with poor light.
I advise you to place your snake plant where it can receive appropriate light.
Conclusion
Knowing What Is The Best Way To Grow A Snake Plant is an idea for multiplying your existing snake plant.
Remember that planning your snake plant by division method and rhizome is the fastest way to grow a snake plant.
Another fastest way is propagating in water, although this has little risk than planting in soil.
Keep your snake plant in indirect sunlight with average room temperature and avoid over-watering.
Remember, the snake plant is poisonous to human beings.
Make sure to use well-draining pots with holes and potting soil inside.
It is better you learn how to make your snake plant grow faster and the best soil for snake plant.
