What helps a snake plant (Sansevieria) grow faster is determined by the proper care given to them.
The snake plant also known as Sansevieria is a naturally slow-growing plant.
As a gardener or a snake plant owner, if you are worried about growing your snake plant faster, do not worry I got you covered.
I also got frustrated when trying to raise my snake plant Duo to inpatient and needed more ideas on how to grow my snake plant.
In this article, you will get the best idea of how to make your snake plant faster.
You can also learn the best way to grow a snake plant.
What Makes A Snake Plant Grows Fast
Here are some tips to help your snake plant grow faster:
Also, read about the health benefits of snake plants.
Keep Your Snake Plant In Sunlight Location
Give your snake plant the proper light.
Where you place your snake plant matters a lot because Proper lightning or sunlight make snake plant grow fast
Snake plants can grow in lowlights, but they will grow faster when exposed to a well-lit place. The light can be tube light or indirect sunlight.
Most plants need at least 6 hours of direct sunlight a day. Why. Some require 16 hours a day.
Snake plants typically require low to medium light conditions, ranging from 50-1500 lux or 5-15 foot candles.
I recommend you place your snake plant in bright and indirect sunlight locations because direct sunlight can harm your snake plant with time.
Keep Your Snake Plant In Average Room Temperature And Humidity
Snake plants require temperatures above 45°F and an average room temperature between 65°F and 80°F.
Snake plants can tolerate fluctuating temperatures but avoid keeping your snake plant in cold temperatures.
Watering Your Snake Plant Properly
Avoid over-watering your snake plant because succulent plants store water in their leaves.
Avoid watering snake plants on a routine or daily basis. Other plants can tolerate overwatering, but snake plants do not require more water.
The best time you should water a snake plant is when the soil in the pot is completely dried out. You can check the earth by sticking your finger about 1 inch deep.
If the soil feels dry on your skin, you should water it. But avoid over-watering the plant—only water when necessary.
Overwatering causes damage like root rot. Be careful when watering; always use a well-draining pot to remove excess water.
Also, learn how to revive a bonsai tree from overwatering.
Choosing The Right Pot For Your Snake Plant
Choosing the right pot when planting or reporting your snake plant is essential.
Snake plants usually do well in small pots of 8 inches to 12 inches when reporting respectively.
When deciding on the pot to use, always select a pot with good drainage for draining out excess water quickly.
Terracotta pots are the best option to maintain the soil’s dryness.
Report Your Snake Plant When Needed And Keep It Slightly Root-Bound!
Reporting snake plants enhances the growth of your snake plant, especially when the root is overcrowded. We use reporting to create more room for our roots and rhizomes.
You must report your snake plant regularly; otherwise, it will not grow fine no matter how you feed them.
It occurs because the nutrients in the potting mix have been exhausted by The Snake plant.
After immediately reporting, check whether the root has clustered together as you remove the snake plant from its old pot.
If they have tied together gently, separate them from each other with your two fingers. To help them adapt to the new space created for them.
But first, you have to know when to report the snake plant.
The snake plant will grow faster when you keep it slightly root-bound; it also encourages new shootouts to spring forth without interruption.
Fertilize Your Snake Plant Occasionally
Snake plants do not require frequent fertilizing because they are not heavy feeders that depend on fertilizer to grow.
You can use a balanced houseplant fertilizer to boost them every few months throughout the growing season (spring and summer).
The ideal fertilizer possesses an NPK ratio of 10-10-10. However, other ratios might be helpful.
NPK refers to the fertilizer’s nitrogen, phosphorus, and potassium ratio.
Fertilizing snake plants promotes sansevieria plant development by improving the soil mix, but it must be done correctly.
Suppose you do not apply the appropriate amount of fertilizer at the proper time. In that case, the plant may suffer harm, affecting its growth.
Also, read how snake plant is poisonous to humans, cats, and dogs.
Using Soil Mix For Your Snake Plant
Snake plants thrive when planted in suitable soil composition. Your snake plant will stay healthy if the soil is good. Healthy plants develop quickly.
Snake plants love dry soil. Therefore a well-drained soil mix can help minimize overwatering concerns.
In the event of damage or unexpected overwatering, healthy soil may aid recovery.
Putting these plants in regular or compact home soil will impact their growth.
Knowing the best soil required for snake plant cultivation is better because soil matters a lot.
If the soil is not well-drained, it retains water, harming the root system and causing plants to develop slowly.
The Snake Plant is a succulent plant that is susceptible to rotting roots. Thus well-draining soil mixing is vital.
Check For Pests And Diseases In Your Snake Plant
Pests and diseases will also have an impact on plant growth. Snake plants are tricky plants that are seldom afflicted by illnesses.
However, if it is harmed, restoring the plant will be challenging.
When a plant is afflicted with a disease or attacked by pests such as mealy bugs or scale, it may experience stress and cause slow development.
Why Do Snake Plants Grow So Slowly?
Snake plants in nature usually don’t grow fast, but they are some factors that affect snake plant growth. The above list can cause your snake plant to grow slowly.
The basics of the problem are too much direct sunlight which can lead to leaf burn, and lack of sun can also affect the growth of snake plants.
When your snake plant is under shade, this can cause slow growth to your snake plant.
Over-fertilizer can cause stunted growth in your snake plant and damage the plant.
How Do I Make My Snake Plant Shine?
Making your snake plant shine is another beautiful way of taking care of your snake plant.
Snake plants are known for their beautiful large leaves. Its big leaf attracts dust and dirt, and it is easy to identify or notice that the snake plant leaf is dirty because it is big.
Step By Step In Cleaning And Shining Snake Plant
Dust The Leaves
Remove dust or debris from the leaves using a soft, dry cloth or a feather duster. It makes the leaves appear cleaner and shinier.
Apply Leaf Shine
Use a leaf shine solution design, particularly for houseplants, to give your snake plant a glossy appearance.
Spray the leaf shine onto the foliage, taking care not to overspray in one area.
Wipe The Leaves
After applying the leaf shine, gently wipe the leaves with a soft, clean towel. It will aid in the uniform distribution of the leaf shine and remove any surplus.
Avoid Direct Sunlight
If you place your snake plant in direct sunlight, the leaves may scorch and lose their luster.
Repeat Every Few Months.
To keep the glossy sheen, reapply the leaf shine every few months.
It is crucial to note that a shiner is not responsible for your plant’s health, but it only makes it look shiny.
If you choose to use a leaf shine product, carefully read and follow the instructions to avoid injuring the leaves or overusing the product.
Conclusion
Knowing what helps you grow your snake plant faster is an idea for a good gardener.
No one will be happy seeing their snake plant dying or not growing after investing money in it.
It is essential to know that snake plants require direct, indirect sunlight and an average room temperature between 65°F and 80°F.
Remember to water your snake plant. Always ensure to fertilize your snake plant, avoid over-fertilization, and use the proper soil to bring out water.
Also, read the best soil for snake plants.
