How to store drill bits? we store Drill Bits with a Perforated Board Organize Your Drill Bits In A Set Or Box and Store Drill Bits In A Cool And Dry Place.
Proper care is essential for a functioning drill with a long service life. In the past, I was running into problems at home because drills rust or can’t be found.
In this article, you will find out which steps you need to follow so that you can enjoy your drill for as long as possible.
Also, read my Drill Bits Buying Guide and the types of drill bit by clicking here.
Why Should I Store My Drill Bit?
Before talking about how to store drill bits, we should first look at the importance of storing our drill bits.
In terms of storing our drill bit, three things are particularly important here:
Firstly, you should store drill bits so that they can be found again.
Secondly, we should store our drill bits so that they can last as long as possible.
Thirdly, we store our drill bits so that they won’t rust and damage.
A drill bit is usually made of metal. Metal has the unpleasant property of rusting.
I’ve experienced this myself because I used to keep my drills in my (semi-humid) garage. It takes time to rust, but eventually, rust will set in.
How To Store Drill Bits In The Best Way
How to store drill bits: Drill bits are made of metal, so To prevent them from rusting or damaging, we must observe the following:
Store Drill Bits In A Cool And Dry Place
How to store drill bits: bits should be stored in a cool and dry place In a temperature-controlled basement or workroom or a dry garage.
If you don’t have such a space, a toolbox or metal cabinet can still help protect the drills.
A toolbox or metal cabinet protects the drills from environmental influences.
Depending on how many drills the craftsman owns, the overview can suffer – especially if they were purchased individually.
Read How To Make A Garden In A Wooden Planter
Store And Organize Your Drill Bit In A Drill Set Or Box
How to store drill bits? Drill sets are usually small plastic folding boxes that clearly present all the drills with a numbered slot.
Small plastic drill sets have also proven to be useful for storing an assortment of drills.
They not only protect the drill from environmental influences but also make it easier to find the drill with the diameter you need.
The individual drills, on the other hand, come packaged separately and quickly cause rust in the toolbox.
In addition, they can damage each other when “thrown into them.”
click here to read how to Organize drill bits.[link]
Use a Perforated Board To Store A Drill Bit
How to store drill bits: Many craftsmen or DIY enthusiasts like to use a perforated board to store their drills. A perforated board is worthwhile here.
These are made of wood or plastic and are available from specialist retailers, but can also be easily made yourself.
To make a professional board by yourself, Drill holes in a board that correspond to the sizes of the drill bits.
An alternative to this is dry floral foam. A large piece is suitable as a replacement perforated board. Known for floristry needs,
Read How To Learn Pottery At Home |Full Course
Summary
A logical order in the workshop in question guarantees that the drill bits you need can be found within a short time.
It is wrong and improper if a drill is left in the drill chuck of the drill after use.
It’s not just the sharpness of the cutting edges that can suffer. The dreaded corrosion can also occur, which then makes the drill unusable.
How To Preserve The Drill Bit From Getting Spoilt
In order to make a used bit as durable as possible, it should first be removed from chips and dust and cleaned thoroughly.
It applies in particular to the so-called SDS drills, in which the power transmission between the drill and the drilling tool always takes place via special grooves around the shaft of the drilling tool.
It is precisely these grooves that need to be kept dust-free.
After cleaning the drill bit, it may make sense to grease it occasionally to prevent corrosion further.
A drilling and chiseling grease is best suited for this purpose.
This drilling and chiseling grease should always be applied in a thin layer to store the drilling tool.
However, making a drill last longer also requires that it be re-sharpened from time to time.
It is best done using safety glasses on a professional grinder with a silicon carbide grinding wheel.
The drill should be ground at a so-called tip angle of 118 degrees.
To achieve this, however, different types of practical brackets have also proven to be effective.
Suppose you don’t trust yourself to grind your drill purely manually. In that case, you can rely on the commercially available drill grinding devices.
Click here to read How To Sharpen A Drill Bit by yourself.
How to maintain and care for your drill bits
Especially if you are a hobby DIY enthusiast, you will accumulate more and more different drill bits over the years.
In addition to concrete and stone drills, there are also HSS drills, metal drills, wood drills, etc read the Types Of Drill Bits
You can find out more about wood drills here: I have a full guide on buying good wood drills. If interested, click here to read.[Link]
If you buy these in a set, you have the advantage that there is usually a storage option included.
Things look different again when buying individual items. If the drills are stored safely, nothing more can happen to them.
Only the wear and tear associated with use could render it unusable. But there are tips here, too.
How To Care And Maintain A Drill Bit By Greasing The SDS Drill
SDS is a drill shank system for all rotating and impacting power tools such as drills or hammer drills.
The “plug-turn-sit” system developed by Bosch (now internationally known as the “Special Direct System”) enables quick, tool-free exchange of drills and chisels and guarantees better power transmission through special grooves on the drill shank.
I bought Bosch GSB 24-2 and tested it myself. Click here to read my honest review of Bosch GSB 24-2.
These small driving teeth rub against each other during the operation.
To reduce tear and wear, it is recommended to grease the changing linings.
Drill and chisel grease such as RENOLIT DEP 2 is suitable for this. It must be applied to the shaft before use.
After a longer period of use, the fat is wiped off again – this also removes any grinding media – and coated again with a fresh, thin layer for storage.
In principle, the feed and the machine at the interchangeable holder should be kept dust-free.
How To Care And Maintain Your Drill Bit By Shipping Them
The drill bits gradually become duller with each use. But the good pieces don’t have to be replaced immediately.
Regular sanding can extend their life significantly. However, this requires a bit of sensitivity and practice.
Suppose you want to manually sharpen your drills bit again. In that case, you will need a suitable grinding machine with a grinding wheel made of silicon carbide.
Safety glasses and possibly a holder in order to safely achieve the so-called point angle of at least 118 °.
If you are unsure, it is better to set the angle a little higher – this will only make the drill sharper.
If no holder is used, the index finger can be used to help. The tool to be ground must be carefully placed on it.
The cutting edge is then carefully moved from top to bottom on the grinder.
Danger! Do not turn the drill! Only when the first side has been sanded can the tool be turned 180 degrees and then continue the process.
If manual grinding is not possible, drill grinders can also be used. These are available from specialist retailers and ensure optimal grinding.
However, the purchase is relatively expensive. Click here to read How To Sharpen A Drill Bit by yourself.
To Care And Maintain Your Drill Bit By Maintain Your Drill Chuck
To ensure that your drills last as long as possible, you should maintain the chuck regularly. The drill chuck is particularly important here.
For example, you should regularly grease an SDS drill chuck. This drill chuck is the “Special Direct System” and allows drill bits to be changed within seconds.
It is used for hammer drills and sometimes for impact drills.
To minimize wear when drilling, it is worth greasing. In my opinion, it extends the lifespan.
I always have a small bowl of drilling grease in my toolbox*.
I apply the grease before drilling and wipe it off again after drilling. I reapply a thin layer before storing.
Read How To Make A Vertical Planter
Care And Maintain Your Drilling Bit By Applying Oil Film That Protects Against Rust
You can additionally protect your drills with a simple machine oil*.
To do this, occasionally apply a thin film of oil. But a little oil is enough; you don’t have to bathe your drills in it.
Tip: If you have everything in a toolbox, box, or drawer for practical reasons, it’s best to add a piece of chalk or charcoal.
These draw moisture from the environment. But also change these regularly.
With the tips from this article, you should be able to store and store your drill bits.
Eventually, I managed to do it over time. It is important that you do everything you can to prevent rust from forming (oiling, greasing, storing in a dry place) and that you can find the things again.
Here, everyone has their own system. I can recommend a perforated strip on the wall as particularly practical:
Read How to drill a wall for cable
Conclusion
Now, you have learned how to store drill bits. It would be best if you kept your drill bit in a cool and dry location to avoid rust.
Remember, drill bits are made with metal, so they hate moisture. Always dust and apply oil On your drill bit and also on the chunk.
In all, learn to organize your drill bits in a toolbox. Click here to read How to drill through a wall.
