How to get broken drill bit out of wood, metal, concrete, and other building materials? We remove the broken bit using needle nose pliers, tweezers, etc.
Applying the wrong force, using inappropriate tools, or those in poor condition can cause a drill bit to break and remain inside the drilling hole.
When drilling in wood, metal, concrete, and other building materials
Bit breaking has also happened to me several times and makes my wood splinter.
In this article, I will show you how to remove a broken drill and what you can try with which material.
But I have an article showing you how to drill wood without splintering. If you are interested, please click here to read [Link]
7 Reasons A Drill Bit Breaks Inside A Hole Or Material
I am not only showing you how to get broken drill bit out but also pointing out the causes of your braking drill bits.
Before knowing how to get broken drill bit out of hole, we should see why our bits break. Below are some reasons why the Drill can break:
1. A drill bit breaks inside a material because your drill bit was clamped too loosely and broken due to a malformed (swinging) rotational movement.
2. A drill bit breaks inside a hole because A problem occurs at the location you want to drill: hard inclusion, wooden branches, reinforcing bars in concrete, etc.
3. A drill bit breaks inside a material because The quality of the Drill was poor or the Drill was already quite worn out because of poor storage. Here are a few storage tips.
If you are interested, I have an article about storing a drill bit. Read how to store a drill bit by clicking here.
4. Your drill bit breaks inside a material because you selected your feed or the speed was too high. i.e., the pressure forward
5. A drill bit breaks inside a material due to improper chip evacuation; the drill jams and breaks.
6. A drill bit breaks inside a material because The cooling wasn’t right, and the Drill got too hot, causing it to break.
Perhaps there are several other important reasons – these seem to be the most important.
Prevent this by drilling carefully and with concentration and not making such mistakes.
Some you can protect yourself better against (poor drill quality, inadequate cooling, too high a feed rate, etc.), and others you can’t (unexpected change at the drilling location).
Ensure you get the right bit for your job; click here to read The Types Of Drill Bits and Buying Guide.
How To Get A Broken Drill Bit Out Of Metal
A drill bit can get broken inside a metal because of the wrong speed application.
Nevertheless, I have a detailed article on the right speed required for any metal. I even explain it in tables.
👉Click here to read How to get through the toughest metal with the right speed.👈 [Link]
Method 1. Get Broken Drill Bit Out Of Metal By Using Pliers.
It is the easiest option when the drill bit breaks and still has some parts of its surface outside the hole.
It means that the bit breaks inside the hole and still has some sharp edge outside the hole.
To carry out this tax, Use pliers. Use a combination plier or needle nose pliers to remove the broken drill bit carefully.
To remove the Drill, insert the pliers into the hole and grasp the spiral groove. Make sure to hold the bit family.
Once you grab the bit, First, slightly move to the left to slide the piercing fragment out of place. Pull it out as soon as you feel it loose in the hole.
📝 Important notes 💯
Don’t you think your bit always breaks because you don’t know how to drill a metal correctly?
Also, learn a full guide on how to drill holes correctly into steel 👉 click here now to read how to drill steel correctly👈[Link]
Method 2 Get Broken Drill Bit Out Of Metal By Using Tweezers
Using tweezers is the same as using a plier, but a tweezer can pinch smaller items and penetrate through small holes.
Insert the tweezer grabbing point in the hole and grab the Drill. Turn the tweezers to the left, oscillate from side to side, and pull them out.
If you don’t have a tweezer, method three will be best for you.
Method 3: Get Broken Drill Bit Out Of Metal By Using Two Screwdrivers
Use two thin flat-head screwdrivers to remove the broken bit. Force One at the top and put the other at the bottom of the hole.
Make sure you force them inside. Still, it stopped moving. The idea is to make the screwdriver act like a tweezer.
Use your left hand to clamp the head of both screwdrivers and use your other hand to clip the parts of a screwdriver that entered inside the hole. Make sure the plier is close to the work surface.
Turn the drill chip counterclockwise and pull it out of the hole.
Method 4: Get Broken Drill Bit Out Of Metal By Using A Hammer
How to get broken drill bit out of metal The hammering techniques can also be considered when the pliar can’t grab the bit or when the bit is loose inside the hole.
A good option is to knock the Drill out. To do this, Apply oil inside the hole, wait for some time, turn your workpiece over, and hit it on the back.
The vibration Force will cause the Drill to move outwards, so you can then take it out with pliers.
Method 5: Get Broken Drill Bit Out Of Metal By Using Glued Solder
If the diameter of the hole is very small and does not allow you to remove the bit piece with pliers or clamps, you can use a welder.
Use a welding machine and a thin electrode. Weld the electrode to the stuck Drill so that it gets stuck from the first impulse.
Please wait a moment and try to remove it. However, you must remember that if you weld the electrode to the hole’s walls, the problem will only worsen.
To avoid touching the electrode to the workpiece, wrap the tip of the electrode with electrical tape.
Method 6: Get Broken Drill Bit Out Of Metal By Unscrew
You can also unscrew your Drill from a stuck hole. The idea is simple: use a flat, sharp ion to punch on the broken bit to ensure it has a cut that can enable a flat screwdriver to hold it.
The cut should look like a flat screw head. Once you have finished cutting, use a flat screwdriver to unscrew the bit out of the hole.
Of course, you should not damage the workpiece when making slits.
A second option is to use a thread crown (only works on taps). It is usually hammered in around the broken Drill and then unscrewed.
Method 7: Get Broken Drill Bit Out Of Metal By Using A Drilling Machine
How to remove broken drill bits from metal using a drilling machine is also useful in this part of removing A broken drill.
After your bit has broken, remove the broken bit and insert a new one of the same diameter.
Use the machine to drill out the broken drill bit. This method only destroys the peace of metal inside the hole.
How To Get Broken Drill Bit Out Of Wood
How to remove a broken bit from wood There are several effective methods to remove a split drill bit from the hole in a few minutes.
Method 1: Remove The Broken Drill Bit From The Wood By Pulling Out The Broken Drill Bit With A Pliar
How to get broken drill bit out of wood with a plier. Use a combination plier, needle nose pliers, or tweezers to remove the broken drill bit carefully.
But this method is applicable if the broken drill bit has a bit of extension outside, and you can use this method for any material, wood, metal, or concrete.
Method 2: Remove The Broken Drill Bit From The Wood By Punching Out The Broken Drill Bit
Another thing to consider when thinking about how to get broken drill bit out is the Punch method.
This method is advisable if your drill bit breaks inside your workpiece and bursts out from The Wood.
If you drill, the bit breaks after bursting your workpiece. You can then use an elongated rod, pen, or (old) drill bit to knock the broken drill bit out from behind.
Alternatively, there is also the option of drilling a hole in the back and thus opening up a channel to the Drill and punching it out with A nails or an old drilling bit.
Method 3: Remove The Broken Drill Bit From The Wood By Applying Oil To The Broken Drill Bit
Apply oil inside the hole and wait for some time. Once the oil has entered successfully, turn your wood over [I mean the back]
Place a small piece of wood where the hole was about to burst.
Then tap the wood with a hammer until the bit comes out, or still the bit shoots out to a point where you can drag the bit out with pliers.
Method 4: Remove The Broken Drill Bit From The Wood By Drill Out The Bit
If your drill bit got stuck inside a wood, I would advise you to turn your piece over and Mark the exact point where you want to drill, but this time it will be at the back.
Once you have gotten the right point at the back of your wood, drill the exact point correctly so you will meet with the formal hole you are trying to at the front.
When the two holes meet, use a nail or old drill bit to punch out the broken bit.
Method 5: Remove The Broken Drill Bit From The Wood By Undrilling Remove The Broken Drill Bit
How to remove broken drill bits by undrilling: We can achieve this method when we cut our drill bit, and there are enough parts of the bit outside the hole.
To unscrew the bit, lose the machine drill chuck and remove the broken bit from the drilling machine.
A drill chuck is where we open and close to fix our drilling bit inside the machine.
If you don’t know how to Clamp and change the Drill of different drilling machines, click here to read more. [Link]
In this article, I give tips on how to correctly clamp and change the Drill and explain what types of drill chucks there are.
The drill chuck has a nut heard that lets us twist it clockwise and anti-clockwise. I have lived an image below that labeled what a drill chuck is.
Use the drilling machine to clamp on the bit that hangs in your workspace, then unscrew the bit anti-clockwise.
How To Get Broken Drill Bit Out Of Wall Or Bricks
For example, if you want to get a drill out of a brick or concrete wall, you can widen the hole and pull out the Drill.
You could fill this enlarged hole and re-drill it later.
With a hammer drill or drill bit, you can force the Drill out of the wall using brute force.
To know more about hammer drills, I have an article prepared for you. Click here to read about hammer drills [Link]
However, a lot of things around the drilling site often break.
Always use the right bit for the wall; if you don’t know how to identify a wall drilling bit, I already have an article that will teach you what a wall bit looks like. Click here to read more about wall-bit.
Another alternative, if this is possible due to the situation, is to leave the Drill stuck, fill it over, and drill a new hole somewhere else.
What Are The Precautions To Prevent The Drill Bit From Breaking
But, as prevention is always better than cure, we share a series of tips and advice to prevent these accidents from happening:
1. Apply the correct force: Exerting too much pressure on the Drill can be counterproductive.
The most effective way to use this tool is to hold it firmly without force. The Drill will do the rest.
2. Use the ideal drill bit: A wide variety of drill bits on the market vary depending on the material or surface to be worked on.
If you want to make a large hole, it is best to start with a small drill bit and gradually increase its diameter.
3. Check the condition of the drill bits: Before starting work, it is advisable to check their condition, that is, if they are damaged, if they are sharp, etc.
Click here to read How To Sharpen A Drill Bit.
4. Clamp each drill bit firmly and securely. Recheck this before you start drilling.
5. Do not drill with too much feed and an adjusted speed (I have already made recommendations for this in various tables on this website. Click right now to check it out [Link]).
6. When drilling, do not make any jerky movements or try to change the drilling direction by violently twisting the Drill.
7. Before using, examine your drills for existing wear.
8. When drilling in metals, always have enough coolant on hand and use it while drilling.
9. When using drills with a small diameter, pay more attention to ensuring that they do not break because they are more likely to break due to their low strength.
The general rule is: Always be concentrated when drilling and focus on the work.
Carelessness and negligence can not only result in serious injuries but can also cause the Drill to break.
Summary Of How To Get Broken Drill Bit Out
Many solutions exist to remove a broken drill, whether pulling, turning, or hitting.
There are gentler methods and more brutal ones. Ultimately, it depends on whether the Drill has to be removed or not the workpiece will be damaged as a result.
When it comes to masonry or bricks, I always enlarge the hole, pull out the Drill, and then fill it or re-drill it Or use a welder.
A threaded crown can often work well on wooden pieces, which is why I think it’s not a bad idea to have one at home:
Generally, as I have seen, precaution is always the first thing to consider when working with drilling bits. Be careful, so I won’t fall into issues when drilling.
